- Hook Mount -

Product Features/Specifications

Gecko Tow hook brackets are used to mount a whip generally to the front of the vehicle by means of  a tow hook.  Simply slip the clamp over the tow hook and tighten it up.  Choose the proper part number below for either horizontal mounted tow hooks or vertical mounted town hooks..  

• Black powder coated steel.
• Approximately 9” long
• (1) Clamp and hardware included to mount the bracket to the tow hook.
• (1) 1/2” diameter hole to mount the whip.
• Note:  If mounting a lighted whip, make sure that the bracket has a chassis ground connection.
• Part # HM100 (straight),
• Part # HM100T (twisted)

- Rod Anchor Point (Patent Pending) -

Product Features/Specifications

This is a NEW INNOVATION from Gecko Products!  Are you always trying to find a place to tie your safety flag down for storage while traveling?  Well, with Gecko’s ALL NEW Rod Anchor Point, you can safely and securely store your safety whip while you travel and at the same time reduce the damage to your whip that occurs with most other means of storage.  Simply attach this Rod Anchor Point  to the rod either above or below the flag.

•  Swivel stainless steel D-Ring.
•   (2) Stainless steel worm clamps.
•   Rubber sleeve to protect rod.
• Part # RAP100 (Patent Pending)

- Vehicle Anchor Bracket -

Product Features/Specifications

Gecko Vehicle Anchor Bracket is used to retain the safety whip while in the bent position for storage.  It is a new innovation which helps with user safety and increases the life of the safety whip.  No more accidental whip releases and wear spots on the fiberglass rod.  Used with our patent pending Rod Anchor Point.

• Black powder coated steel.
• Approximately 10” long
• (2) 7/16” diameter holes used to mount the bracket to the vehicle.
• (1) 1/2” diameter hole to mount the whip.
• (1) Snap-hook swivel included.
• Note:  If mounting a lighted whip, make sure that the bracket has a chassis ground connection.
• Part # VAB100

Now you can have the BEST of BOTH WORLDS!

Be certain that you are maximizing your vehicle exposure while on the jobsite by increasing the height of your mine safety flag while your vehicle is in motion.  Our new Spring Lock eliminates your spring equip safety whip from bending while being used as a result of wind drag.

-  Holds the safety flag at its maximum upright height while being used!

-  Allows for the whip / spring to be bent over for storage while not being used!

Product Features/Specifications

•   Manufactured from steel plate.
•   Black power coat finish.
•   Laser cut for precision fit.
•   Works with most Mine Safety Whips on the market.
•   MADE IN THE USA!
•   Part # SL500 (Patent Pending)

- Right Angle Mounting Bracket -

Product Features/Specifications

Our right angle bracket is a universal bracket that can be used to mount both lighted and non-lighted safety whips.  Many times it is mounted to a vehicle on its bumper for inside the box.  

• Black powder coated steel.
• (2) 5/16” diameter holes on one leg to mount the bracket to the vehicle.
• (1) 1/2” diameter hole to mount the whip.
• Note:  If mounting a lighted whip, make sure that the bracket has a chassis ground connection.
• Part # RAB100